UVB lamp and Philips electronic ballast complete set with free shipping

UVB 35/50/70 watt metal halide lamp, including Philips electronic Multiwatt ballast with all cables, plugs and ceramic socket

Ready to use - everything you need for operation at a special price.

Selectable lamp power - just click:

35 watts MINI
35 watts
50 watts
70 watts
70 watts FLOOD

The Multiwatt electronic ballast can be switched to the different powers.

electronic ballast:

Switchable for all UVB metal halide lamps for 35/50/70 watts
For all HQI / HID / HCI / CDM discharge lamps
Protected housing with strain relief (cable clamp)
Product of the brand Philips
Proven long service life at maximum permissible temperatures
Automatic safety shutdown in the event of lamp failure and end of lamp life (EoL)

Weight complete set 400g
Dimensions of the electronic ballast: 19 x 8.5 x 3.5 cm
Color: gray, dark gray

FAQs: Here you will find frequently asked questions about terrarium UV lamps:

Frequently asked questions about UV lamps

Technical details:

EEI energy efficiency index: A2
Supply voltage: 220… 240 V.
Mains frequency: 50… 60 Hz
Radio interference suppression: according to EN 55015 / CISPR 15
Safety: according to EN 61347-2-12
Current harmonics according to EN 61000-3-2
Immunity to interference, immunity to interference according to EN 61547

Heat behavior
Due to the loss of ballast power and the heat generated by the lamp, heat can build up in an enclosed space. It is therefore important to ensure that the temperature at the measuring point tc of the electronic ballast is not exceeded even under unfavorable conditions.

Warning!
According to the safety regulations, the device must be disconnected from the mains before changing the lamp!
Conductive materials must have a minimum distance of 4 mm to the terminal block.
Installation only by qualified specialists.
The terminals for protective conductors are not suitable for through-wiring.